KIPC India Private Limited

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Presenting the Ceasefire Action-Pac, the first of its kind extinguisher in the world which can be used as a backpack or as a trolley mounted extinguisher which can be easily carried to the scene of the fire to battle the flames instantly. This means that when a fire breaks out , you are not dependent on the fire services to reach you on time.

Powered by watermist and foam both, it has spray and jet modes which which ensures both large amounts of the extinguishing agent and extensive coverage as well.

Activated in seconds and lightweight, the Action-Pac is ideal for single person response systems.

The Action-Pac uses bio-degradable foam and water to fight fires which makes it an extinguisher that also protects the environment.

Product Overview

Ceasefire Action-Pac, the first of its kind Foammist powered extinguisher that can be used both as a backpack extinguisher as well as trolley mounted extinguisher. Packed with immense firefighting power, it can be easily carried to the scene of the fire to battle the flames.

While other extinguishers use chemicals to put out fires that completely ruin your equipment. The Ceasefire Action-Pac has been specially designed to cause no damage. The USP of this fire extinguisher is that it uses Watermist, which causes no collateral damage, ensuring that business operations are up and running at the earliest.

The Ceasefire Action-Pac fights fires with a lightweight dual-mode gun. The Jet Mode of the gun enables the firefighter to deliver large quantities of extinguishing agent into the fire zone from a distance to subdue the fire. The Spray Mode offers extensive coverage and protection against radiant heat when the firefighter approaches near the fire zone. Modes can be easily switched using a lever.

The Action-Pac is available in two variants: Pure Mist and Foam. The extinguisher ensures zero risk of thermal shock or recoil while using, and is safe to use on any fire, including electric, thanks to its sub-80 micron mist. Fitted with two 6 litre stored low-pressure containers, the Action-Pac is always ready to come to the rescue.

Product Features

Easy to use with Quick Activation

Fights Class A & B Fires

Does not require any Electricity

Tamper-proof Safety Seal

Every Extinguisher is Hydrostatic Pressure tested

Low pressure, safe technology

Tested and Certified by ERDA

Safe on Humans

1 minute of Continuous Discharge

Braided Rubber Hose Pipe

Stainless Steel Body

Environment friendly

Anti-bacterial Additive


Available in pure Watermist or in Watermist+Foam


APPLICATION AREAS:

*Garment Stores and Warehouses

*Hospitals

*Hotels

*Restaurants and Food Supply Chain

*Heritage Buildings

*Stadiums, Exhibitions and Weddings

*Factories

*Cinema halls and Auditoriums

*Malls

*Airports

*Petrol Pumps and Police

*Schools

Additional Information:

• Item Code: IND558
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

Never underestimate a fire. With enough oxygen and other fuels, even the smallest flame can turn into a full-scale blaze, destroying everything in its path in just six minutes. The problem is, even if firefighters are rushing to your aid, external factors such as traffic and construction could prevent them from reaching you in time.

Which means that to beat a fire, you need two important things on your side: Quick response time and a powerful firefighting equipment that’s easily accessible on the premises. Equipment that gives you the power to take on any kind of fire, of any size.

Ceasefire has just the solution.

Powered by revolutionary Watermist technology, CF 2000 maximizes the firefighting and cooling properties of water, and then increases it manifold.

It’s highly dependable and being a standalone firefighter, you don’t need to worry about issues like malfunctioning pipelines and wear and tear on parts that affect commercially available hydrants. What’s more, while other hydrants run dry and other fire extinguishers are exhausted before putting out all the flames, CF 2000 continue the fight against fire.

Featuring the same potent firefighting power as conventional hydrants with much more efficient usage of water, CF 2000 can be connected to existing water pipes, ensuring an unlimited water supply.

The CF 2000 practically guarantees an unlimited water supply. It can be easily connected to an existing water pipe/hydrant and pressure line – effectively making hundreds of litres of air and water readily available for fighting the flames. It also features an AFFF Foam additive option for increased extinguishing power.

In other words, there is virtually no limit to its fire suppression power.

Product Features

Introduction: CF 2000 is the advanced standalone Watermist hydrant system. The Watermist hose reel CF 2000 practically guarantees an unlimited water supply. It can be easily connected to an existing water pipe / hydrant and pressure line effectively making hundreds of liters of air and water readily available for fighting the flames..

Effective use of water :100% water is converted into mist, thanks to a vast evaporation surface, which evaporates in the fire environment.

Fighting larger fires : CF 2000 ensure 3 times further reach than normal Watermist hydrants that emit droplets of 100 – 150 microns by converting water into small droplets of less than 40 microns.

Thermal barrier : Thanks to large surface coverage, the mist's cross section of water droplets create a barrier against radiation..

Classes of fire : CF2000 work on all classes of fire as well as electrically started fires (E).

Compatible : CF 2000 conduct no electricity (up to 35kV) and can be safely used on electrically started fires. Hence compatible with electronic equipments.

Safe on people : The mist from CF2000 is made of water or inorganic salt solutions and does not harm people or the environment in the way that fire extinguishers using chemically active substances would.

Safe on buildings : As there's no thermal shock damage, there's no risk of cracks to structural elements, steel casings and power line ceramics.

Safe of property : In CF 2000 the water evaporates on contact with the fire, ensuring minimal collateral damage. .

Easy on the environment : The mist generated by these firefighting systems is 100% non toxic and ecofriendly.

Additional Information:

• Item Code: IND547
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier OR As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Product Overview

Never underestimate a fire. With enough oxygen and other fuels, even the smallest flame can turn into a full-scale blaze, destroying everything in its path in just six minutes. The problem is, even if firefighters are rushing to your aid, external factors such as traffic and construction could prevent them from reaching you in time.

Which means that to beat a fire, you need two important things on your side: Quick response time and a powerful firefighting equipment that’s easily accessible on the premises. Equipment that gives you the power to take on any kind of fire, of any size.Ceasefire has just the solution.Powered by revolutionary Watermist technology, CF 3000 maximizes the firefighting and cooling properties of water, and then increases it manifold.

It’s highly dependable and being a standalone firefighter, you don’t need to worry about issues like malfunctioning pipelines and wear and tear on parts that affect commercially available hydrants. What’s more, while other hydrants run dry and other fire extinguishers are exhausted before putting out all the flames, CF 3000 continue the fight against fire.

Featuring the same potent firefighting power as conventional hydrants with much more efficient usage of water, CF 3000 uses just 60 litres of water where a normal hydrant would needs thousands of gallons to achieve the same results. It also features an AFFF Foam additive option for increased extinguishing power.

Being a self-contained, standalone firefighting device, CF 3000 is suitable for locations with no ready supply of compressed air and water. This easy-to-use system features an in-built pressure container, water storage unit and an optional foam supply unit. In an emergency, all you need to do is pull out the long hose, activate the device and instantly you’ll be armed with CF 3000’s immense firefighting power.

Product Features

 Introduction: CF 3000 is a self contained standalone firefighting device, suitable for locations with no ready supply of compressed air and water. This easy-to-use system features an in-built pressure container, water storage unit and an optional foam supply unit..

Effective use of water :100% water is converted into mist, thanks to a vast evaporation surface, which evaporates in the fire environment

Fighting larger fires : CF 3000 ensure 3 times further reach than normal Watermist hydrants that emit droplets of 100 – 150 microns by converting water into small droplets of less than 40 microns.

Thermal barrier : Thanks to large surface coverage, the mist's cross section of water droplets create a barrier against radiation..

Classes of fire : CF3000 work on all classes of fire as well as electrically started fires (ESF).

Compatible : CF 3000 conduct no electricity (up to 35kV) and can be safely used on electrically started fires. Hence compatible with electronic equipments.

Safe on people : The mist from CF3000 is made of water or inorganic salt solutions and does not harm people or the environment in the way that fire extinguishers using chemically active substances would.

Safe on buildings : As there's no thermal shock damage, there's no risk of cracks to structural elements, steel casings and power line ceramics.

Safe of property : In CF 3000 the water evaporates on contact with the fire, ensuring minimal collateral damage. .

Easy on the environment : The mist generated by these firefighting systems is 100% non toxic and ecofriendly.

Additional Information:

• Item Code: IND548
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh Contact us: +919810599480)

World's only fire extinguisher that triples up as a manual extinguisher, an automatic extinguisher & a modular suppression system.

Product Overview


Ceasefire Launcher - The world's first fire extinguisher that's one, an extinguisher; two, takes over firefighting when the fire becomes too big to handle; and three, turns into a suppression system when no one is around. It's a futuristic product powered by MAP 90 that takes firefighting to a level the world has yet to experience. In the event of a large fire, it allows the firefighter to launch the fire extinguisher in the direction of the flames and rush to safety, while the extinguisher automatically activates and extinguishes the flames.
¿¿¿
When no one is around to detect the fire, this one-of-a-kind extinguisher launches into a standalone, modular suppression system when it senses a rise in temperature over 60 DegreeC. Ensuring that no fire ever goes undetected and unaddressed. The biggest pro of this revolutionary extinguisher is that it eliminates the need for the firefighter to go near the fire. This is a huge benefit, especially in the case of a large blaze, where it allows the firefighter to launch the fire extinguisher in the direction of the flames and rush to safety, while the extinguisher automatically activates and extinguishes the flames.

Product Features

Works on all classes of fire: In a fire situation, there is no time to think about which extinguisher to use on which kind of fire. The Launcher can be used on any kind of fire, making it a truly versatile firefighter.

Deep Drawn Body: The shell of the Launcher is made using deep drawn process. The decrease in welding seam makes it leak proof and allows it to attain high burst capacity.

Convenient handle: The handle allows the firefighter to use the extinguisher with ease. It also helps at the time of the extinguisher being launched at the fire.

Unique Discharge Mechanism: Fitted with a thermal activation device, it ensures a 360-degree discharge for optimum suppression effect.

Self-Actuation: Since the Launcher can be self-actuated, it enables safe evacuation, eliminates the fire and stands guard at high fire risk areas.

Two Heat Sensors: Armed with two heat sensors, that pick up temperatures over 60 deg.C, activating the system automatically as a suppression system.

Easy Snap Safety Seal: This seal ensures that the extinguisher has not been tampered with, and is ready for use in the event of a fire.

State-of-the-art Pressure Gauge: If the pressure needle is in the green zone, it indicates that the extinguisher is in perfect working condition.

Hydrostatic Pressure Testing and Helium Leak Detection Test: This ensures that your Action Pac performs perfectly. Because when it comes to a fire, there are no second chances.

EPDM Rubber Hosepipe: This durable, long-lasting pipe doesn't develop any cracks due to wear and tear.

Conforms to ISI Standards: Meets and conforms to ISI standards.

Application Areas

1) Offices
2)School and Hospital
3)Mall
4)Paint Factories
5)Petrol Pumps
6)Factories and Manufacturing

Additional Information:

• Item Code: IND556
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Cheque
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

Water is fire’s oldest enemy. The best extinguishing agent known to man. It has a theoretical cooling ability of 2.6 MW per litre per second. But in a real fire situation, such tremendous cooling power can only be achieved with hundreds of litres of water. Because nearly 80% of the water escapes the fire zone without evaporating.
Water’s immense firefighting power can be optimally utilised only by complete vaporisation in a fire environment.

To achieve this, water must be broken down into microscopic molecules that have a surface area coverage many times higher than water. These droplets (about 150 microns in size) must then be delivered to the fire with a kinetic force strong enough to overcome fire’s own convection currents. The result: a powerful, reliable and efficient extinguisher.

Ceasefire now brings together all these features and creates the Watermist Compressed Air Foam System; the best firefighting weapon ever designed. Ceasefire's Watermist Compressed Air Foam System features a high technology gun which breaks water up into miniscule droplets. These droplets are then delivered through micro nozzles with a high degree of dispersion onto the flames, allowing you to fight even very large fires successfully.

Product Features

Introduction: Water's immense firefighting power is harnessed in CFs Water Mist extinguishers by breaking it down into microscopic molecules. These droplets (about 150 microns in size) are delivered to the fire with a kinetic force strong enough to overcome fire's own convection currents.

Works on large fires : The gun in Ceasefire's Water Mist Compressed Air Foam System breaks water up into miniscule droplets which are delivered through specialized nozzles dousing fire effectively.

Increased protection : The mist also acts as the perfect barrier against thermal radiation

Application: Works on Class A, B and electrically started fires

Thermal shock proof : Does not cause cracks to structural elements, steel casings andpower line ceramics, due to the nonexistence of thermal shock damage.

Safe to use : No hazard to humans or damage to property due to low pressure water mist of approx. 150 micron size, generated using plain water.

Maximum efficiency : The mist's miniscule droplets of water 50 microns cover a larger surface.

Effective usage of water : 95% less water than traditional sprinkler systems with equivalent or better performance.

State of the art pressure gauge : The world's smallest and yet remarkably easy to read, this is the only pressure gauge that can be tested onsite, using a special magnet to ensure that it is working perfectly and is 100% accurate.


Controllable discharge : A simple squeeze grip activation mechanism allows you to control the discharge and optimise use of the extinguishing agent.

EPDM rubber hosepipe : Superior grade EPDM rubber is far more flexible than the normal rubber used in most hosepipes. It is also far less prone to cracks.

World class quality : Comes with ISO 9001 and CE certification, and conforms to ISI standards. Comprehensive Helium Tests and Leak Tests also guarantee that the products you buy are manufactured according to the world's most stringent quality standards.

1 Year Warranty : The 1 Year Warranty means Ceasefire is looking out for the health of your fire safety products.

Additional Information:

• Item Code: IND545
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requiremnt
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
The Wireless Siren is a device which sounds a 98dB alarm (away from the Control Panel which has an in-built alarm). It gives you the option of having sound alerts at more than one location, covering a larger area and also affecting a louder alarm. Up to 2 Sirens can be attachedto one Control Panel.

Product Overview

In Ceasefire Pro Security System, a sophsticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.

Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.

In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.

Peripheral accessories like wristband transmitters can be used to send an emergency signal.

Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.

Now your home is only as far as your laptop is.

Product Features

Introduction: A highly intelligent Smoke Detector cum Strobe Light, the Ceasefire Siren can be used both indoors and outdoors. With different siren settings that can be customised, it not only has a loud, piercing 98-decibel alarm that can't be ignored, its powerful strobe light aids visibility.

Durable: Features a double plastic cover for extra protection against the elements.Loud Warning System: Extremely loud 98-decibel alarm ensures everyone in the vicinity is alerted to the danger.

Strobe Light: Aiding visibility in a dark and smoky environment,a strobe light comes on when the alarm is activated.

Tamper-Proof Design: Triple tamper protection, with three hidden switches raises an alarm in case of tampering.

Re-chargeable Batteries: Comes with a re-chargeable battery pack.

IP55 Rated: IP (Ingress Protection) Code classifies and rates the degrees of protection provided against dust and water.

CFR Quality Assurance: Built to Ceasefire's high standards, which are in compliance with international quality standards.

International Certification : UL listed and EN certified.

Additional Information:

• Item Code: IND541
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Couier Or As Requirement
• Production Capacity: 100
• Delivery Time: 4-5 Days
• Packaging Details: Per Piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no: +919810599480)

Ceasefire introduces Pro Wireless, a wireless fire alarm system designed to take detection to a whole new level. The system is governed by the Pro Control Panel, a panel fully capable of automatically collecting data from the various sensors. The very instant a fire is detected, the detectors wirelessly talk to the Pro Panel, which in turn triggers a response, raising the alarm and displaying the exact location of the threat on the LCD screen.


Then, it takes a technological leap. The Pro Panel allows a 24x7 connection with strategically placed wireless cameras that capture every moment. These cameras become your eyes on the scene, letting you stay connected with the goings-on on your premises. When a threat is detected, the Pro Panel's SecureSoft software instantly dispatches an SMS, an email, and an MMS to you, with footage captured from the wireless camera both before and after the time the system is triggered. It even gives you full access, allowing you to log on from any remote server, no matter where you are, to check on your premises and program the system.

Product OverviewThe Ceasefire Smoke Detector is a fully supervised wireless photoelectric smoke detector that is compatible with PowerMax+ Panel. Designed for a wide range of residential and commercial applications, this detector is easily installed and has a streamlined design.

Wireless Smoke Detectors are designed to detect smoke produced by a fire.

Smoke detectors based on photoelectric technology are sensitive to the accumulation of dirt on the sensor. In response to such an occurrence, a maintenance event is generated, indicating sensor problems. This self-diagnostic capability significantly enhances detector reliability.

Ceasefire's state-of-the-art wireless photoelectric and standalone smoke detection systems give you the critical time window required for effective fire fighting and safe evacuation, preventing extensive damage to your property and saving precious lives.

Product Features

Introduction: It is an ultra sensitive photo-electric smoke detector, ensures that fires are detected before they get out of control. Equipped to detect particles of smoke as small as 0.33 microns, it can detect a fire in its early stages and reacts swiftly, instantly setting off a loud, piercing alarm.

Ultra SensitiveUltra sensitive photo-electric device senses smoke in the small 0.33 micron range.

Voluble Alarm Emits a loud, piercing 85db alarm guaranteed to alert everyone in the vicinity.

Long Battery Life Low battery usage ensures battery life of approximately 2 years.

International Standards Conforms to ISO 9001–2000 & CE.

Tamper-Proof Design Tamper-proof bracket raises an alarm in the event of tampering.

CFR Quality Assurance Built to Ceasefire's high standards, which are in compliance with international quality standards.

Installer Friendly: Easy to install.

Additional Information:

• Item Code: IND542
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: courier OR As Requirement
• Production Capacity: 100
• Delivery Time: 4-5
• Packaging Details: per pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. 

The Wireless Repeater is designed to relay digital data between wireless PowerCode transmitters and a target PowerCode receiver. Repeater links are required when the target receiver is beyond the range of at least some of the wireless transmitters and is therefore incapable of receiving transmissions directly. 

If the distance between the transmitters and the target receiver is too large to be covered with one repeater, several auxiliary repeaters may be added along the communication path. This way, a multi-level network is created. Up to 16 auxiliary repeaters can be positioned between the farthest group of transmitters and the target receiver. A receiver module, a transmitter module and a controller motherboard are the building blocks of the Repeater.

Product Overview

In Ceasefire Pro Security System, a sophsticated network of sensors, detectors and cameras are connected through wireless technology to the control panel.

Thanks to the X-10 technology, you can program your security lights to switch on at a preset time, you could also do the same with your indoor lights and so on. Incendently this technology will also work on your other electronic appliances.

In case of your sensors detecting a threat they will send a signal to your control panel which will alert you with an email, a sms and MMS that will show you a recorded footage for 7 seconds during the alarm period.

Peripheral accessories like wristband transmitters can be used to send an emergency signal.

Our software SecureSoft brings your home to you no matter where you are. All you have to do is log in to take a look at your house through the Wi-Fi cameras.

Now your home is only as far as your laptop is.

Product Features

Introduction:  Created to ensure accuracy of event reporting, the Ceasefire repeater assists communication between distant detectors and the Control Panel, guaranteeing no signal loss and zero time lapse. Equipped with a smart anti-collision mechanism, it supports multiple, simultaneous transmissions with ease.

Relays Communication:   Relays signals between remote detectors and panel.

Anti-Collision Mechanism:  Smart anti-collision mechanism supports multiple simultaneous transmissions.

Low Battery Alerts:  Equipped with a facility for visible and transmitted low battery indications.

International Certification:   UL listed and EN certified, conforms to CE standards.

IP55 Rated:  IP (Ingress Protection) Code classifies and rates the degrees of protection provided against dust and water.

Installer Friendly:  Compact and easy to install.

CFR Quality Assurance:  Built to Ceasefire's high standards, which are in compliance with international quality standards.

Additional Information:

• Item Code: IND543
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or Requirement
• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no:+919810599480)

Pump Driven System

The Pump Driven System adds cutting edge technology to traditional sprinkler systems by harnessing Watermist for maximum extinguishing efficiency. Not only is it an economical replacement for traditional sprinkler systems in offices and buildings, but is also suitable for larger scale local applications, or areas where the fire hazard is likely to be in an enclosed space.

 

Water, the principal component of this extinguishing agent is stored in a reservoir/tank that is connected to a pump. On receiving a signal from the control panel a high-powered pump propels water from the water reservoir/tank quickly and efficiently to the pipes and nozzles.

Features of the Watermist Auto-Quell System:

Multiple Applications Works on A, B, C and Electrical Fires, and is suitable for a variety of applications.

Self-Actuating Featuring an inbuilt detection mechanism that leads to instant and automatic activation, the system eliminates the need for human intervention.

24x7 Protection Being automated, the system is in a perpetual state of readiness to combat a fire as soon as it breaks out.

Extended Reach Includes flexible tubing that can reach difficult-to-access areas that may not be able to accommodate any other means of detection.

Quick Installation Simple design, and can be installed within a few hours, which means a significant reduction in labour costs and downtime.

 

Long Lasting Its rugged quality ensures it can withstand even harsh conditions where other types of detection systems might be rendered inadequate.

Environmentally Friendly, no ODP Unlike other firefighting agents like Fluorocarbons, CO2 , Dry Chemical Powders, etc., Watermist does not have any effect on the ozone layer nor does it contribute to global warming.

Non Conductive The droplet size is less 100 microns. Such a small-sized droplet has little kinetic energy. Being light, it floats in the air and is non conductive up to 35kva.

High Standards Built to Ceasefire’s high standards, which are in compliance with international quality standards.

Low Water Usage with Mist of 60-100 microns With normal firefighting systems, only about 5% of water directed at the fire is actually used to put out the fire. Watermist not only uses less water to put out fires, it also uses only 20% of the water a conventional water-based system uses.

Extra Security for People – Screening The small droplets of mist fall over a larger surface, creating a perfect barrier for thermal radiation, thus providing effective protection against fire for firefighters and people in the vicinity.

Post Fire Damage Reduction About 80% of the damages resulting from a fire are not caused directly by the flames, but by the extinguishing action.

Safe for People and the Environment As the mist comprises of water, it does not expose people to chemically active substances, ensuring it can be safely used with no risk of medical problems.

Economical Water as an agent does not cost anything. Traditionally the amount of water required is significantly low.

An Alternative to the Traditional Sprinkler System Can potentially replace a building’s sprinkler system as it works faster than water, resulting in less fire damage and doesn’t soak the premises in the process of putting out the fire.

Additional Information:

• Item Code: IND551
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no:+919810599480)

Product Overview

The ProStar is a further upgrade from the EcoStar and is advisable to tackle larger and more potent fires.

The outer shell of Prostar is made of NOMEX - TOUGH, which is a polymer developed by world-leader Dupont. Its structure makes it exceptionally resistant to chemicals, radiation and heat, and gives it great strength and anti-static properties.

Prostar’s moisture barrier consists of FR knitted fabric with PU membrane, to protect against the intrusion of water, chemicals and viral agents, allow metabolic heat to escape and reduce overall heat stress during strenuous activities. Apart from this, Aramid felt is used in this fire suit to act as a secondary heat barrier.

Aramid / Viscose FR are used in the inner protective lining of Prostar, to provide optimum comfort to the fire fighter by reducing surface friction and improving overall mobility.

Lastly, the sewing thread used in this suit i.e. 100% NOMEX, adds the final safety signature.


Product Features

Introduction : With fires producing incredible amounts of heat and smoke, its very difficult for even the most experienced fire fighters to get close enough to the fire to fight it. Wearing the Prostar proximity suit, firefighters can tackle large fires with ease.


DuPont Certified: Procured from a DuPont certified supply chain, these are authentic, reliable fire proximity suits.

Four Protective Layers : Four robust layers of protection between the firefighter and the flames.

Heat Resistant Fibres : Layers made from heat resistant fibres such as Nomex, Kevlar and PBI Gold help firefighters move in and out of the fire without great risk.
Application : Proximity suits to fight small and medium sized fires.

Additional Information:

• Item Code: IND568
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Product Overview

As with any garment, a Fire Suit passes throughmany stages (and many hands) during manufacture.Spinning the yarn, dyeing and cutting the fabric,sourcing the complementary parts of the garment,from boots to gloves to helmets, and lastly,stitching and final assembly of the suit.

With so many stages in the process, there are manyopportunities for slip-ups in quality. At each point,cost-cutting measures could be adopted - an obviousexample is using cheaper, inferior materials in thefabric blend. These slip-ups could add up to aseriously compromised fire suit.

At Ceasefire, every single stage in the processconforms to a battery of stringent internationalnorms. All Ceasefire Fire Suits comply with EN469:2005 level 2 standards. There are, incidentally,brands available, which also conform to EN469:2005, but only to the older level 1 standards.In addition, every single vendor in the supply chainis a certified DuPont Nomex Quality Partner.Which, incidentally, is the highest certification onecan have in this area.

Ceasefire Fire Suits are made out of not one but four protective layers, to ensure your safety. Starting from the outer layer,these are:

L AY E R 1

This is the most important layer, with the greatest exposure to heat and flames. The quality of this outer shell decides how close the fire fighter can go to the fire. Ceasefire Fire Suits always use molecularengineered fire resistant fabrics like Nomex, Kevlar and PBI Gold, the most state-of-the-art fabrics of their kind.

L AY E R 2

A moisture barrier membrane, to protect against the intrusion of water, chemicals and viral agents, allow metabolic heat to escape and reduce overall heat stress during strenuous activities. In our case, this layer is made up of fire retardant knitted fabric with a PU membrane.
L AY E R 3

A thermal barrier, to provide a strong, secondary heat barrier. We use a mix of Nomex and Kevlar, quilted together to form a layer.

L AY E R 4

A final, inner protective lining which is designed to provide optimum comfort to the fire fighter by reducing surface friction and improving overall mobility. We use Nomex filament face cloth for the inner lining.

E C O S TA R H E L M E T

The Ecostar Helmet is designed to protect the head from injury during drills, rescue-fire fighting missions, or any other actions performed by fire-fighters.

Construction of the helmet(and materials used toproduce it) provide theuser's head with maximumprotection

The helmet conforms to allprovisions of EN 443:2008norm, which requires morerigorous tests than theprevious norm.

Provision for torch withswitch, and breathingapparatus with holder. Fullycompatible with modernwireless communication sets.


The face protector (sight)is made with materialsof advanced thermalparameters which provideresistance to elevatedtemperature, flame,chemicals and scratches.The face protector issemitransparent andprovides protection againstinfrared radiation.


The shell of the helmetis made of polyester Kevlar glass laminate.

Grips to fasten the breathingapparatus and torches.


Ecostar Gloves


Ecostar boots

Additional Information:

• Item Code: IND572
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: courier
• Production Capacity: 20
• Delivery Time: 4-5 Days
• Packaging Details: per pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

Every day, welders and ironworkers are exposed to the risk of burns from molten iron sparks and splashes, open flames and intense heat. Molten Aluminum has a temperature of 660°C which causes skin peeling and 3rd degree burns upon contact. Molten Steel has a temperature of 1400°C which causes higher degree burns and skin damage on contact.

Additionally, physical exertion in hazardous environments also leads to accidents that are caused by heat stress or heat stroke.

With that in mind, Ceasefire presents 'MetalStar'- protective clothing that can be used to prevent various industrial hazards like molten iron splash burns and welding spark burns.

For MetalStar, we use a new treated fabric system developed by DuPont called NOMEX MetalPro Plus. This special surface treatment significantly improves the shedding effect, and therefore the overall protection level.

The Ceasefire MetalStar fire suit conforms to ISO 11612:2008 standards and is tested as per the strict test norms laid down in this standard.

Product Features

Introduction: With fires producing incredible amounts of heat and smoke, it's very difficult for even the most experienced firefighters to get close enough to the fire to fight it without risking fatal injuries and burns. Ceasefires protective metal suit, Metalstar has been designed for high-temperature, high-risk industrial level fires and is a must in such situations.

DuPont Certified: Procured from a DuPont certified supply chain, these are authentic, reliable intense fire proximity suits.

Four Protective Layers: Four robust layers of protection between the firefighter and the flames.

Heat Resistant Fibres: Layers made from heat-resistant fibers such as Nomex, Kevlar, and PBI Gold help firefighters move in and out of the fire without great risk.

Application: Designed for high temperature, high-risk industrial level fires.

Additional Information:

• Item Code: IND570
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per PIeces

The Pulse Mist Based System has been specially designed for smaller micro-environments, or for areas where the fire hazard is likely to be in an enclosed space (such as in a food production unit, a machinery room, hangar, office or storage space). The extinguishing agent for the application is stored in cylinders attached to the network of pipes and detectors.

This system also comprises of pressurized cylinders filled with water, available in sizes ranging from 12 ltrs - 100 ltrs, rigged to the system via a manifold. A Multi-Rotor System propels water into the tubes. And a Single Hood Schrader Valve and a Multi Hood Pneumatic Spring Ball Valve release the cylinder contents as soon as a drop in pressure is detected.

Applications:

Food Industry: The widespread presence of oil, butter and fat in food production pose a major fire hazard.Not only do oil fires spread rapidly, they cannot be put out with ordinary water extinguishers.And the chemical agent extinguishers that are utilised in such cases are equally tough on food as they are on fire.

Industrial Sheds: Industrial sheds where expensive machinery and goods are stored can be very vulnerable to fire. Sparks from machines or wiring, caused by power fluctuations or a faulty installation can fall on inflammable material, or the goods being stored there, resulting in a full-scale conflagration.

Hangars: Fuelled by the extensive presence of petroleum, grease, paint, etc, fires in airplane hangars can potentially end in a devastating explosion. What’s more, any damage to the airplane or airplane parts stored there can be economically crippling. Another cause for concern is that the sheer height and the presence of engines and metal could urge the fire out of control. In the event of a fire in a hangar, the Ceasefire Auto-Quell System’s automatic fire detection and suppression capabilities work quickly andcapably to put out the fire immediately. Being water-based, its non-damaging, non-corrosive technology ensures zero collateral damage as well as zero downtime.

Warehouses: Fires in deserted areas such as warehouses and storage areas can go undetected till all the goods stored inside are completely destroyed. What’s more, depending on their contents, stored goods can actually provide fuel for the fire. Not only do fires in warehouses result in huge amounts in collateral damage, the fire can spread to adjacent storage areas.

 

 

Offices and Industries: The presence of electronics, wiring, furniture, files, books and carpeting makes offices and industrial areas prone to fires. Not only do fires in such places result in huge amounts of collateral damage, they can also spell an end or long-term halt to business operations.

Tunnels and Undergrounds: Tunnels and undergrounds are lit 24x7, with very little opportunity to check the wiring. What’s more, with automobiles and fumes constantly in the environment, even a small spark could trigger and inferno, in seconds. The high ceiling doesn’t help, making it harder to put out the flames.

Benefits:

 • An exhaustive planning process, executed by engineers with years of experience.

• State-of-the-art solutions and products in association with world leaders.

• Design and installation of your Auto-Quell System overseen by professionals, ensuring delivery of a high quality, reliable, Watermist-based system.

 

Additional Information:

• Item Code: IND525
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Cheque
• Port of Dispatch: Courier
• Production Capacity: 200
• Delivery Time: 4-5 days
• Packaging Details: per number

Industrial Products Company supplied all ceasefire protection, we have authorized dealer

Product Overview

Typical electrical enclosures include control panels, UPS, transformers/generators, cable trays, power vaults and other similar enclosures with wires and components which can spark a fire at any time. Most of these can be found in practically any industrial or commercial space. These instruments are all susceptible to fire which may occur due to a variety of reasons, ranging from improper installation and wire fatigue to overloaded circuits and equipment failure. Should a fire occur in any of these locations, it could spread rapidly, destroying lives and even the building.

Using Ceasefire's Quick Response System, the fire can be caught at a single location and extinguished before it can spread. It completely avoids the collateral damage that is caused when one uses standard chemical foam extinguishers in these situations. Moreover, because the system utilises a non-damaging, non-corrosive extinguishing agent, there is no significant downtime required to restore the facility to a normal functional level.

Electrical Short Circuit is the primary reason for big, fatal fires in most premises today. In such fires these short circuits occur mostly inside the electrical panels as this is where high voltage lines terminate. In seconds, what is a small spark turns into a flame and then a fiery blaze in a matter of few minutes. Lives are lost and property is gutted.

Presenting Ceasefire's Quick Response System(CQRS) that is designed to fight fires that occur in the enclosed space of electric panels. The CQRS system's split second detection and activation ensures that the fires are killed in the nascent stage inside the most vulnerable spaces i.e. the electrical panels.

Key Features
​

• LBCB Certified in Direct HFC 236fa, HFC 227ea gas based, 2 & 4 Kg variants.
• CQRS operates automatically and requires no human intervention. The system is ready 24x7 to fight fire.
• Simple design for easy functionality
• Entirely self-contained and does not require any power supply.

Additional Information:

• Item Code: IND563
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Cheque
• Port of Dispatch: Courier or As requirement
• Production Capacity: 01
• Delivery Time: 4-5days
• Packaging Details: per pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

CSEE Excellence is distinguished for its world class standard in emergency evacuation. The premium range boasts high-end technical expertise and uber class designs, making it the perfect blend of form and function.

Every 2mm-thick photoluminescent sign in the Excellence range is UV-resistant. Even in the blackest of smoke, it points you to the nearest fire escape. Available in opaque or transparent acrylic glass and brushed stainless steel variants, the signs stand guard 24x7, guiding you through darkness and dense clouds of smoke so that you reach safety immediately.

The Excellence range promises you only the best designs. Which means it serves without compromising on the beauty of your premise. This dual advantage is what makes the range one of the most sought after emergency evacuation systems ever.

For instance, the Excellence Fire Safety signages give you all the information you need to address the fire immediately. From signage that mark and give you information about the extinguisher, and the kinds of fire it can fight, to signage that guide you to the hosepipe and fire alarm, this series has it all.

Product Features

Introduction: The Excellence Fire Signages range gives all the information you need to address the fire immediately. The Excellence Fire Signages range gives you all the information you need to address the fire immediately.

Outer Cover 2 mm-thick photoluminescent plastic.

Paint: Highest quality UV resistant glass paint.

Framing: Every sign has an aluminium frame, rendering it structurally sturdy and adding greatly to its aesthetic value.

Material: Non-radioactive, non-phosphorous, non-toxic and lead free.

Luminance: 215 mcd/sq.m

5 Year Warranty: The 5 year Warranty means Ceasefire is looking out for the health of your fire safety products.

Additional Information:

• Item Code: IND553
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Cheque
• Port of Dispatch: Courier
• Production Capacity: As Requirement
• Delivery Time: 4-5 Days
• Packaging Details: Per Packet or Pcs

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no:+919810599480)

Product Overview

Introducing Ceasefire's Quick Response System, a revolutionary firefighting solution which combines ground-breaking technology with functional simplicity to keep what's precious, safe.

The most prominent feature of the Ceasefire Quick Response System is the specially designed heat-sensitive pneumatic polymer tubing.

It is connected at one end to a Ceasefire extinguishing agent container, while the rest of it runs unobtrusively throughout the area at risk.

When the flame comes in contact with the heat-sensitive tubing and reaches a temperature of 150 - 180 DegreeC, the tubing bursts open at that exact spot and forms a miniature nozzle.

The pneumatic mechanism triggers the valve of the extinguisher and sprays the extinguishing agent out of the tube directly onto the flame, dousing the fire instantaneously.

Because the extinguishing agent used is CO2, this system is effective to combat any kind of fire.

This is ideal for locations where there is a chance of ignition of fire at multiple points. For example, in a large server, where a voltage surge can short-circuit components at multiple locations and cause them to catch fire.

Product Features

Introduction: CQRS is a revolutionary firefighting solution that combines ground-breaking technology with functional simplicity. It senses an increase of temperature associated with fires and activates automatically to bring the fire under control. This system is effective to combat any kind of fire.

Indirect System: The heat - sensitive tubing also acts as a detection device. In the event of a fire, the extinguishing agent is delivered through a steel conduit and sprayed across the entire area through strategically placed nozzles

Application : Ideal for places where fires can break out in localised areas.

High Pressure : High pressure type for maximum extinguishing effectiveness.

International Quality: Built to Ceasefire's high standards, which are in compliance with international quality standards.

Self - Contained : Does not require any power supply and will function normally in the event of a power .

Instant/Automatic activation :Eliminating the need for human intervention, the system is in a perpetual state of readiness to combat a fire as soon as it breaks out.

Flexible Application Uses Dupont HFC 236fa, HCFC 123 or CO2 extinguishing agent, making this system useful for a multitude of application.

Extended Reach . Flexible tubing extends protection to areas that are difficult to access and may not be able to accommodate any other means of detection.

Easy Installation : Simple design, and can be installed within a few hours, which means a significant reduction in labour costs and downtime.

Rugged quality: Rugged quality ensures tolerance to harsh conditions where other types of detection systems might be rendered inadequate.

Tremendous Throw : Though it is lightweight, it is packed with tremendous power and throw, to penetrate past even the finest grills and meshes.

Mechanism and Indicator: Used / Unused Mechanism and Used / Unused Indicator keeps track of usage and ensures there are no unpleasant surprises during an emergency.

Additional Information:

• Item Code: IND561
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: per pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.(Yogendra K. Singh Contact us:+919810599480)

Product Overview

The Pulse Mist Based System has been specially designed for smaller environments, or for areas where the fire hazard is likely to be in an enclosed space (such as a transformer room). The extinguishing agent for the transformer is stored in cylinders attached to the network of pipes and detectors.

This system also includes pressurised cylinders filled with water, available in sizes ranging from 12 ltrs - 100ltrs, rigged to the system via a manifold. A Multi-Rotor System propels water into the tubes. And a Single Hood Schrader Valve and a Multi Hood Pneumatic Spring Ball Valve release the cylinder contents as soon as a drop in pressure is detected.

Product Features

Multiple Applications

Self-Contained

Self-Actuating 24x7 Protection

Extended Reach

Quick Installation

Long Lasting

Environmentally Friendly, no ODP

Non Conductive

High Standards

Low Water Usage with Mist of 60-100 microns

Extra Security for People - Screening

Post Fire Damage Reduction

Safe for People and the Environment

Economical

An Alternative to the Traditional Sprinkler System


Applications:


Apart from transformers, this system can be used for other areas and applications.

- Generators
- Genset canopy
- Engines: electric, diesel and petrol
- Earth movers
- Automobiles: buses, cars and trucks
- Food processing units
- Small food manufacturing units
- Moving kitchens in campers andcatering vans
- Electrical substation
- Factories
- Hangar protection
- Total building/big room protection
- Railways: locomotive, pantry car,coaches, etc
- Metro trains
- Industrial setups
- Any production unit where you don'twant chemicals to halt operations
- Areas where oil or other inflammablefuels are present

Additional Information:

• Item Code: IND552
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requiremnet
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview


Electric arcs are caused due to breakdowns of a gas, which produces a continuous discharge of plasma. This happens because current is flowing through a medium such as air, which is normally non-conductive.

The arcs are formed in the space between two conductive electrodes which are often made from carbon, and once initiated, will draw current from a fixed-voltage supply until the apparatus is destroyed. Electrical arcs are at temperatures high enough to obliterate most materials.

In the electrical industry the threat of an electric arc flash exposure has necessitated the use of flame resistant clothing. The flame resistant clothing intends to minimize burn injury and provide the worker with some protection after being exposed to an electric arc. Non-flame resistant clothing ignites and dramatically increases the burn injury percentage and severity well beyond that of the initial arc flash exposure.

Ceasefire Arcstar provides permanent flame resistance as it does not melt, ignite or continue to burn.

It uses comfortable fabrics for protection and resists breaking open during exposure.

The suit insulates the wearer from heat & decreases/avoids heat burns, providing protection to escape safely.

Product Features

Introduction: With fires producing incredible amounts of heat and smoke, its very difficult for even the most experienced fire fighters to get close enough to the fire to fight it. Wearing the Arcstar proximity suit, firefighters can tackle large fires with ease.

DuPoint Certified: Procured from a DuPont certified supply chain, these are authentic, reliable intense fire proximity suits.

Four Protective Layers : Four robust layers of protection between the firefighter and the flames.

Heat Resistant Fibres: Layers made from heat resistant fibres such as Nomex, Kevlar and PBI Gold help firefighters move in and out of the fire without great risk.

Application : Proximity suits that guard against the intense heat of electric arcs.

Additional Information:

• Item Code: IND571
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no:+919810599480)

Product Overview

Introducing Ceasefire's Quick Response System, a revolutionary firefighting solution which combines ground-breaking technology with functional simplicity to keep what's precious, safe.

The most prominent feature of the Ceasefire Quick Response System is the specially designed heat-sensitive pneumatic polymer tubing.

It is connected at one end to a Ceasefire extinguishing agent container, while the rest of it runs unobtrusively throughout the area at risk.

When the flame comes in contact with the heat-sensitive tubing and reaches a temperature of 150 - 180°C, the tubing bursts open at that exact spot and forms a miniature nozzle.

The pneumatic mechanism triggers the valve of the extinguisher and sprays the extinguishing agent out of the tube directly onto the flame, dousing the fire instantaneously.

Because the extinguishing agent used is HCFC123, this system is effective to combat any kind of fire.

This is an ideal solution in case of fire in a single location, whether small or large, and can be designed to suit the specific needs of the premises.

Product Features

Introduction: CQRS is a revolutionary firefighting solution that combines ground-breaking technology with functional simplicity. It senses an increase of temperature associated with fires and activates automatically to bring the fire under control. This system is effective to combat any kind of fire.

Direct System: The heat – sensitive tubing also acts as an extinguishing agent delivery system. When a fire is detected, the tube bursts at that point, forms a miniature nozzle and sprays the extinguishing agent.

Application : Ideal for places where fires can break out in localised areas.

Low Pressure : Low pressure type for extinguishing effectiveness with minimised collateral damage.

Self – Contained : Does not require any power supply and will function normally in the event of a power outage.

Instant activation : Eliminating the need for human intervention, the system is in a perpetual state of readiness to combat a fire as soon as it breaks out.

Flexible Application Uses HCFC 123 or CO2 extinguishing agent, making this system useful for a multitude of application.

Extended Reach . Flexible tubing extends protection to areas that are difficult to access and may not be able to accommodate any other means of detection.

Easy Installation : Simple design, and can be installed within a few hours, which means a significant reduction in labour costs and downtime.

Rugged quality: Rugged quality ensures tolerance to harsh conditions where other types of detection systems might be rendered inadequate.

Swift and Comprehensive :Running intricately and unobtrusively through servers, genset and electrical mains boxes, the system can be triggered instantly and automatically. This eliminates the need for human intervention and provides a swift and comprehensive solution.

Mechanism and Indicator: Used / Unused Mechanism and Used / Unused Indicator keeps track of usage and ensures there are no unpleasant surprises during an emergency .

Additional Information:

• Item Code: IND560
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Couier or As Requirement
• Production Capacity: 25
• Delivery Time: 4-5 Days
• Packaging Details: per piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh contact no:+919810599480)

Product Overview

Ceasefire Action-Pac, the first of its kind Watermist powered extinguisher that can be used both as a backpack extinguisher as well as trolley mounted extinguisher.

While other extinguishers use chemicals to put out fires that completely ruin your equipment. The Ceasefire Action-Pac has been specially designed to cause no damage.

The Ceasefire Action-Pac fights fires with a lightweight dual-mode gun. The Jet Mode of the gun enables the firefighter to deliver large quantities of extinguishing agent into the fire zone from a distance to subdue the fire.

The Action-Pac is available in two variants: Pure Mist and Foam. The extinguisher ensures zero risk of thermal shock or recoil while using, and is safe to use on any fire, including electric, thanks to its sub-80 micron mist.

Product Features

Easy to use with Quick Activation: Being a stored pressure extinguisher, the Action Pac requires no cartridge system (internal or external) activation. It’s always ready.

Fights Class A, B, F Electrically started Fires : In a fire situation, there is no time to think about which extinguisher to use on which kind of fire.

Does not require any Electricity: The Action Pac doesn’t require any electricity to function. It’s always ready to fight the flames.

Tamper-proof Safety Seal: This seal ensures that the extinguisher has not been tampered with, and is ready for use in the event of a fire.

Every Extinguisher is Hydrostatic Pressure tested: This process ensures that your Action Pac performs perfectly.

Low pressure, safe technology: Being a low pressure extinguisher, there are no risks involved in case the extinguisher is used by mistake, even if people are around.

Tested and Certified by ERDA: The Action Pac has been certified by the Electrical Research and Development Association for being safe to use on electronics.

Safe on Humans: Since the Action Pac uses Watermist to suppress fires, it can safely be used around people.

Watermist ensures no Flooding: Since the mist evaporates quickly, there is no chance of flooding and collateral damage.

1 minute of Continuous Discharge: Packed with 60 seconds of extinguishing power.

Braided Rubber Hose Pipe: This durable, long-lasting pipe doesn’t develop any cracks due to wear and tear.

Stainless Steel Body: The extinguisher’s stainless steel body ensures that there is no chance of corrosion.

Environment friendly: The Action Pac uses bio-degradable foam and water to fight fires.

Anti-bacterial Additive: This additive prevents any kind of bacterial growth in the water, keeping the water clean and fresh.

Available in pure Watermist or in Watermist+Foam: The Action-Pac is available in two variants, as per your needs.

Spray and Jet Modes: The Jet Mode delivers a large amount of the extinguishing agent, while the Spray Mode offers extensive coverage. Modes can be easily switched using a lever.

Ideal for Rapid Reaction: Activated in seconds and lightweight, the Action-Pac is ideal for single person response fire situations.

Maintenance by mere Observation of the Pressure Gauge: If the pressure needle is in the green zone, It indicates that the extinguisher is in perfect working condition, and all the components are a t their optimum.

Additional Information:

• Item Code: IND557
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier OR As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

A fire can start anywhere, at anytime. And in just 6 minutes, it can turn into an uncontrollable blaze. This makes it even more important for you to tackle the fire, before it’s too late.

Unfortunately, tiny lanes, inaccessible roads and traffic jams all are a setback when it comes to rushing to the rescue. Which means that by the time the fire engine reaches the scene of the fire, it could very possibly already be too late.

The need of the hour is a fire engine that can manoeuvre any road, zip through traffic and reach the burning premises in minutes.

Ceasefire introduces a state-of-the-art extinguisher on wheels – The Mobile Firefighter. Powered by the world’s most revolutionary firefighting technology: Watermist.

The power of the Ceasefire Mobile Firefighter.

Ceasefire’s Mobile Firefighter on your side, you can arrive at the scene of the fire in minutes, and keep even the largest fires under control until the fire engines and more help arrives. These unique 9 litre extinguishers, with an extendable hose, can be mounted onto almost any bike. To add to its firefighting capabilities, two spare containers are also attached. Increasing the power of this firefighter by four!

Watermist technology and how it works

Ceasefire’s patented Watermist technology uses the world’s oldest, most effective fire suppressant – water, increasing its power many times over.

Here’s how. Ceasefire extinguishers equipped with Watermist break water down into a fine mist. This mist is then thrown at the fire with a great kinetic force, covering a large surface area. As soon as the mist comes in contact with the fire, it instantly turns into steam. Enveloping the flames, cutting down the oxygen supply and reducing the temperature to below combustion levels. Ensuring that even the largest fire succumbs to Watermist technology. In minutes.

Additional Information:

• Item Code: IND549
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company Supplied all Ceasefire products, we have authorized dealer.

An integrated application system that adds cutting edge technology to the traditional sprinkler systems.

Product Overview

The Ceasefire Watermist Auto-Quell System is a revolutionary, all-purpose detection and fire suppressant system solution. A network of detection devices, special Watermist nozzles and a connection to a water tank is installed indoors. In the event of a fire, the system kicks into action in seconds.

The specially designed nozzles dispense Watermist , made up of microscopic droplets of water (below 100 microns), onto the fire affected area, quickly putting out the flames as well as bringing the temperature down to non-combustion levels.

Entirely self-activated and requiring no human intervention, this integrated system provides a complete detection and suppression solution, working quickly to save property and lives.

What's more, since the Auto-Quell System is Watermist based, it has no long-term effect on the work environment and operations can resume with no time lost.

Components of the Indoor Auto-Quell System

Control Panel: At the very heart of the system is a control panel. On being alerted by the detectors, this state-of-the-art control panel instantly sends a signal to activate the system and release the extinguishing agents.

Detection Components: Ensuring high sensitivity to fire, the system features different types of detectors such as smoke detectors, linear heat detectors, flame detectors and air sampling devices.

Smoke Detectors: Built to detect even the minutest particle ofsmoke, they instantly raise the alarm in the event of a fire by alerting the control panel.

Heat Detectors: In a fire situation, the increase in temperaturetriggers heat detectors in seconds. Heatdetectors are of two kinds, rate-of-rise and fixed temperature detectors.

Linear Heat Detector:A line-type form of fixed temperature heat detection.

Fire Suppression Components

*Watermist Extinguishing Agent
*Pipes and Fittings
*Nozzle Head
*Audible Alarm
*Pump Driven System

Features of the Watermist Auto-Quell System

*Multiple Applications
*Self-Contained
*Self-Actuating
*24x7 Protection
*Extended Reach
*Quick Installation
*Long Lasting
*Environment Friendly, no ODP.
*Non ConductiveEnvironment Friendly, no ODP
*Non Conductive
*High Standards
*Low Water Usage with Mist of 60-100 microns
*Extra Security for People – Screening
*Post Fire Damage Reduction
*Safe for People and the Environment
*Economical
*An Alternative to the Traditional Sprinkler System

Apart from the Pump Driven System, there’s also a Watermist Auto-Quell System for small localapplications – The Self Contained Pulse Mist Based System.

Additional Information:

• Item Code: IND524
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier
• Production Capacity: 20
• Delivery Time: 4-5days
• Packaging Details: per piece

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Every premises is built differently. Which is why, it’s important that a thorough Evacuation Plan is in place to quickly lead people to safety. This plan has to take into account pillars, machinery and more, and create the perfect, quickest escape route.

Product Overview

In densely populated areas such as schools, factories, hotels, cinemas etc.,with cubicles and complex layouts, it is extremely important to have an effective evacuation plan.

In case of a fire, this plan could literally be the difference between tragedy and hundreds of lives saved.

And as with any life saving device, an evacuation plan is not something that can be bought across the counter and utilized in any fashion.

It requires careful planning and assessment by experts, to maximise both safety and efficiency of evacuation in an emergency.

The team at Ceasefire puts together meticulous evacuation plans only after carefully inspecting the premises, taking into consideration all the disparate factors that come into play if a fire breaks out.

Product Features

Introduction :Evacuation plans are a fundamental complement to safety signs They illustrate the evacuation route and building layout and help to educate users of a building in the correct actions to adopt in an emergency situation.

Installation: Evacuation plans are installed near the main entrances and access points to the building, halls and corridors, reception areas where users may congregate for some time.

Design: Innovative design.


Standards: You can be sure that at Ceasefire, we don1t just meet standards, but do our utmost to surpass them. Proof lies in a comparison of Ceasefire SEE with the DIN 67510-4 industry norm.


1 year Warranty: The 1 year Warranty means Ceasefire is looking out for the health of your fire safety products.


FLOOR AND ROOM EVACUATION PLANS

􀂃 Opaque acrylic glass
􀂃 Brushed stainless steel
􀂃 Transparent acrylic glass

Additional Information:

• Item Code: IND555
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 100
• Delivery Time: 4-5 Days
• Packaging Details: Per Packet

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

Ceasefire''s photo-luminescent signs shine brightly through smoke and darkness, showing the route to the nearest exit, pointing you to emergency equipment and clearly marking all safe exits.

The range contained in Ceasefire SEE is comprehensive, covering every possible evacuation need.

For instance, you never know where you may be when fire strikes and results in pitch darkness. You could be far from your cabin, in an unfamiliar part of the premises.

Ceasefire''s Escape Route Signages ensure that from any point on the premises, occupants will have clear directions to the closest safe exit in case of an emergency.

Product Features


Introduction: Ceasefire''s Escape Route Signs ensure that from any point on the premises, occupants will have clear directions to the closest safe exit in case of an emergency.

Fire Reaction: Non inflammable, self extinguishable. The material has a good fire resistance and does not help to the propagation of fire, being classified as flame retardant.

Material: Photo luminescent rigid plastic 2mm thickness.

Printing: Serigraphy, high quality gloss paint with UV resistance.

Cleanliness: The products do not require any particular attention, clean with a dry clean cloth.

Framing: Every sign has an aluminium frame, rendering it structurally sturdy and adding greatly to its aesthetic value.

Standards: You can be sure that at Ceasefire, we don''t just meet standards, but do our utmost to surpass them. Proof lies in a comparison of Ceasefire SEE with the DIN 67510-4 industry norm.

1 year Warranty: The 1 year Warranty means Ceasefire is looking out for the health of your fire safety products.

Additional Information:

• Item Code: IND554
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 100
• Delivery Time: 4-5 Days
• Packaging Details: Per Packet

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.
Product Overview

The Ceasefire Alustar suits are meant for proximity firefighting, bulk flammable liquids firefighting, flammable gas firefighting and similar situations that release high levels of radiant heat.

The suits are an integration of the latest material technology, design and construction workmanship and are certified to EN 1486.

The Ceasefire Alustar is an Aluminized para-aramide proximity suit with multi-layer system.

The suit's outer material has a special aluminization technology called Dual Mirror which enables a much better radiant heat reflection compared to conventional aluminized fabrics. The base fabric is a knitted virgin para-aramide that is extremely light in weight. This makes the suit very comfortable and flexible while in use. The suit is also very strong owing to its rip stop weave.

The second layer is a moisture barrier which prevents water penetration.

The third layer, i.e. the thermal barrier, consists of an Aramid / Viscose FR inner lining quilted to two layers of inherently flame retardant felt. This dual layer felt enables more air to be trapped between the layers causing much better insulation against heat.

With mere 6 kg of weight, Alustar eliminates the discomfort of managing a bulky fire suit and allows one to focus on fire fighting.


Product Features


Introduction :  Fire produce incredible amount of heat and smoke. This makes it difficult for fire fighters to get close to the fire. Ceasefires Alustar Fire Suit helps protect fire fighters. Designed for fires involving flammable liquids & gases, it is considerably lighter than other fire entry suits in the market. 

DuPoint Certified:   Procured from a DuPont certified supply chain, these are authentic, reliable intense fire proximity suits.

Four Protective Layers : Four robust layers of protection between the firefighter and the flames.

Heat Resistant Fibres :  Layers made from dual mirror aluminized knitted KEVLAR fabric, help firefighters move in and out of the fire without great risk. 

Application :  Intense fire proximity suit designed for flammable liquids and Gases.

Additional Information:

• Item Code: IND569
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer. (Yogendra K. Singh Contact us: +919810599480)

Product Overview


The Goldstar is a high-end range of protective suits for Fire Fighting and is made of PBI Gold Material. These suits are recommended for large fires that are beyond the EcoStar and ProStar suits' capacities.

The outer shell of Goldstar is made of PBI - GOLD, which is a blend of 40% thermal resistant PBI fibers and 60% high strength aramid. It does not shrink, become brittle, or break open even under extreme heat. It also has excellent flame resistant properties. The fabric withstands the dangers associated with firefighting, arc flash, and flash fire. It provides firefighters and industrial workers with superior protection and meets or exceeds every National Fire Protection Association (NFPA) requirement and EN 469 standard.

Goldstar’s moisture barrier consists of FR nonwoven with PU membrane, to protect against the intrusion of water, chemicals, and viral agents, allow metabolic heat to escape and reduce overall heat stress during strenuous activities. Apart from this, dual layers of FR nonwoven are used in this fire suit to act as a secondary heat barrier.

Aramid / Viscose FR is used in the inner protective lining of Goldstar, to provide optimum comfort to the firefighter by reducing surface friction and improving overall mobility.

Lastly, the sewing thread used in this fire suit i.e. 100% ARAMID, adds the final safety signature.


Product Features

Introduction: Fires produce incredible amounts of heat and smoke, making it difficult for firefighters to get close enough to the fire to fight it. Ceasefire's Goldstar suit is made of special PBI Gold material and is resistant to the heat radiated by large fires.

DuPont Certified: Procured from a DuPont certified supply chain, these are authentic, reliable fire proximity suits.

Four Protective Layers: Four robust layers of protection between the firefighter and the flames.

Heat Resistant Fibres: Layers made from heat-resistant fibers such as Nomex, Kevlar, and PBI Gold help firefighters move in and out of the fire without great risk.

Application: Made of special PBI Gold material meant to handle large fires.

Additional Information:

• Item Code: IND567
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5 Days
• Packaging Details: per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Product Overview

Transformers are electrical devices which convert alternating currents from one voltage to another, making them vital for any operation to run smoothly. The Ceasefire Watermist Auto-Quell System is a revolutionary, all-purpose detection and fire suppressant solution for transformer fires.

The system consists of a network of detection devices, special Watermist nozzles and a connection to a water tank installed in the local environment of the transformer. In the event of a fire, the system is programmed to kick into action in seconds. The specially designed nozzles dispense Watermist, made up of microscopic droplets of water (below 120 microns), onto the fire affected area, quickly putting out the flames as well as bringing the temperature down to non-combustion levels.

Product Features

Multiple Applications: Works on A, B, C and Electrical Fires, and is suitable for a variety of applications.

Self-Contained: The system is entirely self-contained. It does not require any power supply and will function normally in the event of a power outage.

Self-Actuating : Featuring an inbuilt detection mechanism that leads to instant and automatic activation, the system eliminates the need for human intervention.

24x7 Protection: Being automated, the system is in a perpetual state of readiness to combat a fire as soon as it breaks out.

Extended Reach: Includes flexible tubing that can reach difficult-to-access areas that may not be able to accommodate any other means of detection.

Quick Installation : Simple design, and can be installed within a few hours, which means a significant reduction in labour costs and downtime.

Long Lasting : Its rugged quality ensures it can withstand even harsh conditions where other types of detection systems might be rendered inadequate.

Environmentally Friendly, no ODP: Unlike other firefighting agents like Fluorocarbons, CO2, Dry Chemical Powders, etc.,

Non Conductive: The droplet size is <100 microns. Such a small-sized droplet has little kinetic energy.

High Standards :Built to Ceasefire’s high standards, which are in compliance with international quality standards.

Low Water Usage with Mist of 60-100 microns: With normal firefighting systems, only about 5% of water directed at the fire is actually used to put out the fire.

Extra Security for People – Screening: The small droplets of mist fall over a larger surface, creating a perfect barrier for thermal radiation, thus providing effective protection against fire for firefighters and people in the vicinity.

Post Fire Damage Reduction :About 80% of the damages resulting from a fire are not caused directly by the flames, but by the extinguishing action. Since the mist, with an appropriate (high) degree of dispersion, fully evaporates in the fire environment.

Safe for People and the Environment : As the mist comprises of water, it does not expose people to chemically active substances, ensuring it can be safely used with no risk of medical problems.

Economical: Water as an agent does not cost anything.

An Alternative to the Traditional Sprinkler System : Can potentially replace a building’s sprinkler system as it works faster than water, resulting in less fire damage and doesn’t soak the premises in the process of putting out the fire.

Additional Information:

• Item Code: 550
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier or As Requirement
• Production Capacity: 50
• Delivery Time: 4-5
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

Product Overview

Many facilities such as offices and educational institutions use false floors and ceilings to save space and allow for hassle-free wiring. Very often, these wire racks and cable-snakes can overheat due to

prolonged usage of equipment and are liable to catch fire. In such an event, it is important to extinguish the fire before it can spread and affect the equipment that these cables are connected to.

Ceasefire's Quick Response System can be installed to run above/under these structures and instantaneously put out any fires that may break out. Detecting fires in these concealed spaces can be difficult, but because the system is fully automated and does not require human intervention, it can put the fire out before it is too late.

Product Features

 

Classification: Works on class A, B, C fires and fires involving electrically-charged devices. Effective on a wide range of flammable and combustible materials.

 

Self- Actuated: Does not require any power supply and will function normally in the event of a power outage.

 

Electronics-Friendly: Shown to be electrically non-conductive and is safe for electrically charged equipment, HFC236 is kinder on electronics than the majority of extinguishing agent available in the market.

 

High-value Risk Protection: Suitable for protection on a range of high-value risks as it virtually eliminates damage to high-tech equipment, artwork and other delicate and sensitive objects.

 

No Clean-up required after Discharge: After a discharge, the extinguishing agent can be removed by simple ventilation.

 

24-hour Protection: Automatic detection and actuation controls ensure fire protection is always ‘on’.

 

Flexible Design: Flexible tubing allows protection in areas that are difficult to access and may not be able to accommodate any other means of defection.

 

International Quality Standards: The Ceasefire Quick Response System-M is manufactured to the highest global and national standards like LPCB, ISI and CE.

 

Rugged Free: Can withstand even harsh conditions where other types of detection systems might be rendered inadequate

 

Residue-Free: Being a clean agent, it won’t leave behind oily residue, particulate or corrosive material.

 

Additional Information:

• Item Code: IND565
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Courier Or As Requirement
• Production Capacity: 20
• Delivery Time: 4-5 Days
• Packaging Details: Per Pieces

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.

PRODUCT OVERVIEW

A multitude of things we do today is based around computers and the internet. Early-day computers occupied entire rooms. Nowadays, machines far more powerful fit into a rack of equipment. In spite of inbuilt cooling fans and ventilation, short circuits and power fluctuation can spark fires that will sweep through a rack, destroying expensive equipment and priceless, irreplaceable data.

For large companies, it could mean massive losses in revenue; and worse - a massive blow to reputation.

Ceasefire''s Quick Response System is the complete solution to these problems. Not only will it help extinguish these fires before they cause tremendous amounts of damage, it will also help reduce the time and money taken to clean up and re-establish damaged property. Most importantly, it can save a reputation that''s taken years to build.

FIRE SAFETY PRODUCTS

FIRE EXTINGUISHERS

* Clean Agent
* Powder
* Water
* Foam
*CO2
* Hydro Pyroquell System - CHPS
* New Insta-alert
* Home Safety
* Watermist
* Fire Extinguisher Strolley
* Bike Mounted Kit Watermist Cafs
* Greenmist Extinguisher

The Ceasefire Quick Response Systems are ideal for a variety of applications:

*Server racks .
* Networking / switching racks .
* UPS rooms .
* Gensets.
* CNC machines.
* Injection moulding machines .
* Printing press.
* Diagnostic machines.
* Mobile tower switching areas .
* Electrical cabinets.
* Electrical panels .
* Commercial vehicles such as cars, buses and trucks.
* Heavy transport vehicles such as airplanes, ships and cargo trucks.
* Industrial equipment like forklifts, heavy machinery, gensets and alternators .
* Above false ceilings and below false flooring.

Additional Information:

• Item Code: IND562
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: courier OR As Requirement
• Production Capacity: 50
• Delivery Time: 4-5Days
• Packaging Details: per Piece